Viper 3606V Przewodnik Instalacji Pobierz pdf (Strona 17)

Basic Remote Functions

See Owner’s guide for functionality details on both the LC and 1-way companion remote control.

Reset and Deletion

If a feature needs to be reset or the remote controls need to be deleted, use the following procedure.

Open a door.1.

Turn the ignition to the ON position.2.

Within 10 seconds, press and release the Control button: 2 times if you want to delete remotes or 3 times 3.

to reset features. These function steps are described next.

Delete remotes: This feature erases all remotes from the memory of the security system. This is useful

in cases when a customer’s remote is lost or stolen.

Note: This does not reset the programmed features of the security system.

Reset Features: This resets all features of the security system to the factory default settings.

Note: This feature does not delete the remotes from the security system.

Once you have selected the function step, press the Control button once more and hold it. The LED ﬂashes 4.

and the siren chirps to conﬁrm the selected functional step. Do not release the Control button

While holding the control button, press the 5.

A U X

button on the remote control. The unit chirps to conﬁrm that

the feature has been successfully reset.

Once the feature is reset, the Control button can be released.

Note: For step 1, the + or - Door Trigger Input wire needs to be connected unless using an interface module

that supplies the door trigger through D2D.

Long Term Event History

The system stores the last six full triggers in memory. These are not erasable. To access long term event his-

tory:

With the ignition Off, 1. press and hold the Control button (on Control Center).

Turn2. the ignition On.

Release3. the Control button.

Within 5 seconds, 4. press and release the Control button. The status LED ﬂashes in groups indicating the

last six zones that triggered the unit for 1 minute or until the ignition is turned off (indicated in the order

of most recent ﬁrst to oldest last). Refer to Table of Zones.

Note: The Warn Away triggers are not stored to memory and is not reported.

1 2 ... 12 13 14 15 16 17 18

Brak uwag

Viper 3606V Przewodnik Instalacji Strona 17